Rhino File
Mastercam Setup
1/2 Flat Endmill
Rough Parallel
1/4 Flat Endmill
Finish Scallop /Radial/Parallel
Up-RightL: Pocket Island
Drill+ Contour
1/8 Flat Endmill
Contour
Toolpaths Setup
Shopbot Milling
MIT IAP
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 | 10 | 11 | 12 | 13 | 14 |
| 15 | 16 | 17 | 18 | 19 | 20 | 21 |
| 22 | 23 | 24 | 25 | 26 | 27 | 28 |
| 29 | 30 | |||||
Class Information
- 00 Pavilion Precedents
- About
- Groups
- People
- Barry Beagen
- Beomki Lee
- Breanna Rossman
- Brian Hoffer
- 1.1 Shelf – Shop Drawing
- 1.2 Shelf – Design Iterations
- 1.3 Shelf – Waterjet Tests
- 1.4 Shelf – Crescent Script
- 1.5 Shelf – Final
- 2.1 Block – Initial Design
- 2.2 Block – Draft Design
- 2.3 Block – Final Design
- 2.4 Block – Milling
- 2.5 Block – Final
- 3.1 Mold – Milling
- 3.2 Mold – Silicone
- 3.3 Mold – Cast Unfinished
- 3.4 Mold – Evolution
- 3.5 Mold – Cast Final
- Chris Mackey
- 1.1 Frame Shop Drawings
- 1.2 Initial Shelf Design
- 1.3 Shelf Permutations
- 1.4 Finalized Shelf Scheme
- 1.5 Paper Mockups
- 1.6 Notes on OMAX Tutorials
- 1.7 Metal Mockup
- 1.8 Final Shelf Fabrication
- 2.1 Notes on Milling Machine Operation
- 2.2 Initial Block Design
- 2.3 Block Milling Files Set Up
- 2.4 Block Milling on Intellitek
- 3.1 Mold File Setup
- 3.2 Milling the Mold and Casting
- Chris Martin
- Claudia Bode
- David Miranowski
- David Moses
- Eric Morris
- Evelyn Ting
- Feifei Feng
- Jasmine Kwak
- Jie Zhang
- Laura Schmitz
- 1.1 Frame Shop Drawing
- 1.2 Shelf 21
- 1.3 Paper Mock Up Shelf Fabrication Process
- 1.4 Paper Mock Up Shelf Installed
- 1.5 Steel Test Piece for Waterjet
- 1.6 Final Steel Shelf Fabrication Process
- 1.7 Final Steel Shelf Installed in Frame
- 2.1 Pattern for Mill
- 2.2 Block Milling File Setup
- 2.3 Block Milling
- 3.1 Mold Milling Block
- 3.2 Silicone Pouring
- 3.3 Concrete Pour
- Maya Taketani
- Rena Yang
- Robert White
- Rudy Dieudonne
- Shiyu Wei
- Suk (Shad) Lee
- Susanna Pho
- Trygve Wastvedt
- Tyler Crain
- Tyler Stevermer
- 1.1 Frame Shop Drawing
- 1.2 Aluminum Milling
- 1.3 Panel Concept
- 1.4 Panel Iterations
- 1.5 Testing Panel in Paper and Steel
- 1.6 Fabricating the Final Panel
- 2.1 MasterCam File Setup
- 2.2 Brick Foam Milling
- 3.1 Mold Creation
- 3.2 Mold Milling
- 3.2 Pink Foam Milling
- 3.3 Liquid Rubber Casting
- 3.4 Casting Plaster Brick
- Ulises Reyes
- Yang Wang
- You Jin
- Schedule
Complete Fabrications: The New Normal 